19961909271

24小时服务电话:
BJD-F730JK

产品特点

防夹手装置Anti-pinch device

安全装置:所有设备符合相关过国家标准,气缸限制送板间距,保护各组件的正常运行,工件超厚保护,板件超过当前封板厚度时输送带停止,安全开关在送板避免手被卷入保护操作工安全。

Safety device: all the equipment conforms to relevant national standards, the cylinder limits the distance between feeding plates to protect the normal operation of each group of parts, the workpiece is excessively thick to protect, the conveyor belt stops when the plate exceeds the current thickness of sealing plates, and the safety switch in feeding plates prevents hands from being involved to protect operators' safety.

预铣Pre-milling

预铣装置对板材毛刺崩边或者不垂直的现象,进行再次修饰,已达到更好的封边效果使得封边条与板材的贴合更加紧密,整体性和美观性更佳。

The pre-milling device modifies the burr edge breakage or non-vertical phenomenon of the plate again, and has achieved a better edge sealing effect, making the edge sealing strip and the plate more tightly and better overall and beautiful.

涂胶gelatinize

采用上吸式涂胶直边压贴装置及特点:一个主动压轮(带防封薄带及木皮跑带结构),上压面直径 70mm.后面四个从动压轮,两个带锥度.两个直轮,满足封边带的板件的牢固贴合。特点:可封一般封边机不易封易跑偏的薄带及木皮。

Adopting upward suction type gluing straight side pressing device and its features: one active pressure wheel (with anti-sealing thin belt and wooden skin running belt structure), the diameter of the upper pressure surface is 70mm. The back four driven pressure wheels, two with taper. Features: general edge sealing machine is not easy to seal the thin belt and wood.

四轮压贴Four wheel pressure stick

4 轮压贴,直接和板的边压贴,压的更好

4 wheel press paste, directly with the board side press paste, pressure better

前后齐头End trimming

两台马达,采用独特的工作气压与启动升起来气压分开模式保证齐头的稳定性齐头气缸用的是著名品牌亚德客气缸。

The two motors adopt the unique working air pressure and the separate air pressure from the start to ensure the stability of the same head.

粗修Rough trimming

两台马达,电机可手动调整角 0~5 度;两个直铣刀,配独立吸尘罩。

Two motors, motor can manually adjust Angle 0~5 degrees; Two straight milling cutters with independent vacuum hood.

精修truing

气动精修装置:气动夹带调刀结构取代换带手调的多方面叠加误差(1、手调的螺丝牙较小拧多了磨损大造成间隙大误差大,2、封带不足厚的误差,3、计数器的刻度误差)使得封边效果更好更稳定;两台马达,两个精修铣刀。

Pneumatic finishing device: pneumatic with adjustable knife structure to replace the manual adjustment of multiple stacking errors (1, manually adjusted screw teeth small screw teeth screw more wear large gap large error, 2, insufficient thickness of the tape sealing error, 3, the scale error of the counter) to make the edge sealing effect better and more stable; Two motors, two finishing mills.

跟踪tracking

跟踪方形装置:可修两侧圆角,双马达修角仿形,平面连杆机构,两把仿形铣刀。

Square tracking device: repairable rounded corners on both sides, double motor Angle copying, planar connecting rod mechanism, two copying milling cutters.

刮边Scraping edge

气动夹带调刀结构取代换带手调的多方面叠加误差(1、手调的螺丝牙较小拧多了磨损大造成间隙大误差大,2、封带不足厚的误差,3、计数器的刻度误差)使得封边效果更好更稳定;两个 R2 合金刮刀片,静斜刮边修整刮掉修边时的刀纹使得封边效果更完美。

Pneumatic clamping adjustable knife structure replaces the stacking errors of various aspects of the manual adjustment (1, manually adjusted screw teeth are small, and the wear is large, resulting in large gap error, 2, the thickness of the sealing belt is not thick, 3, the scale error of the counter), so that the edge sealing effect is better and more stable; Two R2 alloy blade, static bevel edge trimming to scrape off the edge when trimming the knife grain, so that the edge sealing effect is more perfect.

抛光机构Polishing mechanism

固定式抛光轮,把封好的边抛的更亮,边角做的更完美。

Fixed polishing wheel, throw the sealed edges brighter, and make the edges and corners more perfect.

触摸屏Touch screen

PLC 总体设备控制,工业触摸屏显示,一键启动,节能环保,各种安全防护提醒,自动计数封边长度以及工作时间。

PLC overall equipment control, industrial touch screen display, one-touch start, energy saving and environmental protection, all kinds of safety protection reminders, automatic counting edge sealing length and working time.

技术参数


Our advantage

企业优势

我们提供更加安全、便捷、优质的服务
品质
全心保障客户利益,业界最苛刻的26道质检工序,
从来料到出厂严格把关;
研发
完全自主产权的产品研发,统购统销的健全供应链体系,
技术业界一流。
服务
售后服务技术一流,遍布全国26个省份的售后技术体系,
让客户享受最专业最贴心的服务 。
The partner

合作伙伴

我们提供更加安全、便捷、优质的服务
社交媒体
社交媒体

诚招国内外经销商 18001121691

国内市场部电话:010-82955269

国际贸易部电话:010-80709688

服务/质量投诉电话:18910611961

售后电话:0516-87221883

公司传真:010-80709688

北金数控——全球高端数控设备及软件提供商

公司地址:北京市昌平区回龙观珠江摩尔6-2-812

版权所有:2008-2018 北金数控 数控开料机 数控钻

Copyright 20082010 北京金雕振兴科技有限公司 Inc. All rights reserved.

《中华人民共和国电信与信息服务业务经营许可证》 备案号:京ICP备09009638